Xiamen Betalent Carbide Co.,Ltd
Carbide blank and carbide router manufacturer.
Add to Cart
Carbide drill bit, pilot drill bit,carbide drill bits for steel, 14mm drill bit,cutting drill bit
What is the Pilot Drill bit?
Before drilling, a rigid centering drill is used to drill an initial hole with a depth of 1-2 times the diameter to ensure the accuracy position of drilling with ordinary drill bit, and reserve chamfer for tapping, this kind of drill bit is pilot drill bit, pilot drill bit is also named chamfer drill bit because of its chamfer function.
This kind of chamfer end mill also has the function of pilot drill, to pilot drill on the alumimun workpiece a 90 or 60 degree chamfer, please tell the sales person what degree you want when you order this product.
Standard size listed below, most of them can be available from stock, ready to ship. For size beyond this list, please contact sales person for the customization.
Standard size of the pilot drill bit:
| d Cutting dia | D Shank dia | Lc Cutting length | L Overall length |
| 1mm | 3mm | 3mm | 50/25mm |
| 1.5mm | 3mm | 3mm | 50/25mm |
| 2mm | 3mm | 6mm | 50/25mm |
| 2.5mm | 3mm | 6mm | 50/25mm |
| 3mm | 3mm | 6mm | 50/25mm |
| 4mm | 4mm | 7mm | 50/25mm |
| 5mm | 5mm | 8mm | 50/25mm |
| 6mm | 6mm | 8mm | 50/25mm |
| 8mm | 8mm | 10mm | 60/30mm |
| 10mm | 10mm | 16mm | 60/75mm |
| 12mm | 12mm | 18mm | 75mm |
| 3.0/6.0mm | 3.175mm | 12mm | 38mm |
1,Regular stock for above size.
2,Tip angle can be 60° and 120° as per requirement, no stock, please consider the producing time.
product picture:
The tip angle of the pilot drill should be equal to or greater than that of the final hole. If the top angle of the pilot drill is small, then the two cutting edges contacting the workpiece before the tip which is easy to cause the edge collapse when the micro drill cuts in.